Network switch

A network switch is a broad and imprecise marketing term for a computer networking device that connects network segments.

The term commonly refers to a Network bridge that processes and routes data at the Data link layer (layer 2) of the OSI model. Switches that additionally process data at the Network layer (layer 3) (and above) are often referred to as Layer 3 switches or Multilayer switches.

The term Network switch does not generally encompass unintelligent or passive network devices such as hubs and repeaters.

The first Ethernet switch was introduced by Kalpana in 1989.

Function

As with hubs, Ethernet implementations of network switches support either 10/100 Mbit/s or 10/100/1000 Mbit/s ports Ethernet standards. Large switches may have 10 Gbit/s ports. Switches differ from hubs in that they can have ports of different speed.

The network switch, packet switch (or just switch) plays an integral part in most Ethernet local area networks or LANs. Mid-to-large sized LANs contain a number of linked managed switches. Small office, home office (SOHO) applications typically use a single switch, or an all-purpose converged device such as gateway access to small office/home office broadband services such as DSL router or cable, Wi-Fi router. In most of these cases, the end user device contains a router and components that interface to the particular physical broadband technology, as in the Linksys 8-port and 48-port devices. User devices may also include a telephone interface to VoIP.

In simple terms, in the context of a standard 10/100 Ethernet switch, a switch operates at the data-link layer of the OSI model to create a different collision domain per switch port. This basically says that if you have 4 computers A/B/C/D on 4 switch ports, then A and B can transfer data between them as well as C and D at the same time, and they will never interfere with each others' conversations. That is the basic idea. In the case of a "hub" then they would all have to share the bandwidth, run in half-duplex and there would be collisions and retransmissions. Using a switch is called micro-segmentation - it allows you to have dedicated bandwidth on point to point connections with every computer and to therefore run in full duplex with no collisions.